Product Description
PDP's Premium Microfiber Clay Mitt is the new generation of clay removal- Faster, Easier, Safer!
The PDP Clay Mitt easily removes surface contaminants from automotive paint, glass, moldings, and plastic. It will pull out or abrade rail dust, overspray, and other contaminants that bond to the vehicle's surface. It covers more area, and faster, than a clay bar, and lasts up to 5 times longer. The polymerized rubber is not only more durable than clay, but if inadvertantly dropped, just rinse clean with water. Also, when using clay, the metal particles are picked up and kneaded back into it, so when do you decide to draw the line and throw it away? With the clay mitt, just rinse off the polymerized rubber. Another advantage is the mitt on your hand easily conforms arounds mirrors, moldings, and all the curved edges of the vehicle. And, it's easier to store! Size is 6.5" x 9.5" x1".
The mitt is dual purpose, enabling an easy prep process: use the microfiber side to wash the vehicle, then turn over to clay.
The soft cuff keeps the mitt comfortable on your hand, without worry of dropping the clay surface on the ground. It also comes with an eyelet hook on the cuff, so you can hang to dry.
The textured clay surface allows for removal of fine and medium debris.
Use PDP's WS1 Wonderspray as the perfect clay lubricant, spraying the pad and the surface, keeping your surfaces lubricated while using the pad. For a quick one-step clean and wax, use with PDP SW89 BodyGloss. Or use with PDP's R200 Iron Melt or R400 Iron+, for the ultimate paint decon, prior to ceramic coating.
Iinstructions:
1) Wash vehicle with M91 Cherry Suds, or M101 Insane Orange through a foamer, to remove road dirt and larger contaminants. Use PDP R95 SuperSol or R125 Concentrated Orange to remove any tar or grease.
2) Lubricate the clay mitt with M91 or M101 and before rinsing, lightly wipe over paint and glass, clay side down, to remove contaminants, repeating as necessary.
3) Clean and re-lubricate mitt often during this process. Then rinse and dry vehicle as normal.
4) If vehicle is already washed, spray WS1 Wonderspray liberally on the rubber polymerized side of the mitt, and also on the vehicle surface, so you can glide the mitt freely across the surface. Use a cross-hatching motion to ensure complete coverage. Wipe residue off vehicle surfaces with a clean dry microfiber towel. Check the clay side frequently, misting with WS1 Wonderspray, or rinsing with water, to remove any contaminants.
5) For a even more thorough deep cleaning of the surface, before ceramic coating a vehicle, apply PDP's R200 Iron Melt onto the painted surface. When it activates the iron particles, use the clay mitt to remove them, then use the microfiber side for the final wash.
Microfiber Clay Mitt
