PC-1 Extra Cut Rubbing Compound

HIGHLIGHTS

PC-1 Rubbing Compound has been formulated specifically for paint finishing on scratch resistant surfaces including UV Cured paints. This new technology replaces traditional compounds and polish/glaze systems to provide a quicker cut to level out 1,500 grit sand marks and remove imperfections quicker and easier, while leaving a brilliant mirror-like gloss.

ABRASIVENESS: 8.5 - 9 out of 10 (10 is highest amount of abrasive)

DIRECTIONS:

• Shake well.
• Apply a small amount of product to the paint.
• Set Variable Speed Polisher to 1,250 ‚œ 1,500 RPM. ‚ Work in a ‚½ meter square area and polish to high gloss.
• Remove any remaining compound residue with a soft clean cloth.
• Wipe carefully with a clean, soft microfiber cloth.

NOTE: Can be used with a foam polishing pad at 1,200 ‚œ 1,400 RPM for as a final finish.

SURFACE APPLICATIONS: OEM paints, repainted or refinished, lacquers, clear-coats and single stage paints. Also for use on water borne or high solids paint.

ADDITIONAL USES: Marine gel coats, plastic headlight covers, Plexi-glass surfaces.

HELPFUL TIPS: Clean compounding pads frequently. Remove compound residue with clean terry or microfiber cloths.

SAFETY & HANDLING: Safety Data Sheets can found online at automagic.com